M-AUDIO Sonica Theater - Manual (Page 17)

Using the diagram below as a guide for placing the speakers around your
computer, make the following speaker connections, as applicable to your setup:
• Connect the Front L/R to the Left and Right speakers.
• Connect the Center/Subwoofer jack to the Center and
Subwoofer (LFE) speakers.
• Connect the Surround L/R jack to the Left and Right
Surround speakers.
• Connect the Surround Center L/R jack to the two Surround
Center speakers.
Make sure that any speakers that you use near a CRT Computer Monitor
are shielded speakers. If your monitor’s image begins to become discolored
in one of the corners or otherwise appears distorted, move the speaker
further away to avoid damage to your monitor.
Line Input Jack
The Sonica Theater has a stereo line input.This input allows you to record
CDs, videos, instruments or virtually anything else, with audiophile-quality
96kHz/24-bit sampling.You can set the Input level of the Line Inputs in the
Sonica Theater Control Panel’s Input/Other tab (see this manual’s Control
Panel section for more details).
Right Front
Subwoofer
Left Front
Center Front
Left Surround Right Surround
Right Center Surround Left Center Surround
17