Multi-Tech Systems FR3060 - Manual (Page 71)

71
Chapter 5 - Remote Configuration and Management
Verify that the Communication Type field is set for COM Port and the Select Port field matches
the COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of the
remote MultiFRAD.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different from the defaults in the dialog box, refer to your modem user documentation and change
the values to match those required by your modem.
Click OK when you are satisfied with your selections.
6 Run the MultiFRAD Configuration program. Click Start | Programs | MultiFRAD 3000 | MultiFRAD
Configuration, or double click the MultiFRAD Configuration icon in the MultiFRAD 3000 program
group.
7 The Dialing MultiFRAD Dialog Box is displayed while software is dialing the remote MultiFRAD.
8 The Reading Setup Dialog Box is displayed.
9 The FR3000 Setup dialog box is displayed. This is the dialog box of the remote MultiFRAD.
Refer to the online Help provided within your software for a description of each dialog box and
field within a dialog box.
10 After you have changed the configuration of the remote MultiFRAD, click the Download Setup
button to update the configuration. The remote MultiFRAD will be brought down, the new
configuration written to the unit, and the unit will reboot.
11 Click Exit after the downloading is complete.
12 The Hangup connection with MultiFRAD? dialog box is displayed
Click Yes to disconnect the phone connection to the remote site.
13 If the same telephone number is not going to be used again in the immediate future, you may
want to remove it from the Port Setup dialog box.
14 At the remote site, reconnect the MultiFRAD to the serial port of the PC and from the Program
Manager screen click the MultiFRAD Configuration Icon to verify that the MultiFRAD is running.