Melitta MES2B - Manual (Page 7)

7
2. Fill the Water Tank with fresh water up to the ‘MAX’ line, and fit
back into the Base (down and in) until it “snaps” into place, see
Figure 4.
FIGURE 4
3. Lift Lid by pulling out on the Lever. Top will pop up. Push back
so Lid is in fully raised position, see Figure 5.
TO OPEN:
FIGURE 5
MES2B/W/R/K/MG/CAN_IB_17-8-05 8/17/05 1:24 PM Page 13