Before using your one:one, Pod brewing system – Melitta MES2B User Manual
Page 6
6
Before Using Your
One:One
™
Pod Brewing System
Become familiar with all parts of the appliance.
Keep your One:One
™
clean
Clean and descale your One:One
™
on a regular basis. See
“Cleaning and Descaling”, pages 12 - 13. We recommend cleaning
the Water Tank and the Drip Spout as well as the Pod Chamber and
Pod Holder, before using your One:One
™
for the first time. Turn on the
machine for a full cycle using water only. See steps 1 - 9
following.
IMPORTANT: THE MACHINE WILL NOT FILTER COFFEE OR TEA
UNLESS THE PUMP HAS BEEN PRIMED BY
FOLLOWING THE STEPS BELOW.
1. Remove the Water Tank by pulling out and then up to remove
from the Base, see Figure 3.
FIGURE 3
MES2B/W/R/K/MG/CAN_IB_17-8-05 8/17/05 1:24 PM Page 10