Metz Elba 63 TD 61 - 100 MT - Manual (Page 9)

3. Presetting TV stations
Autostore function,
sorted to countries
The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in the
station table and can then be stored by way of the
key.
If you do not like the order in which the stations appear in the station table, you can sort the stations to match your own requirements as
described on the next page.
OK
Press this key on the remote
control....
The screen displays Explanation
1. Call the menu
„Station settings“
2. Call the autostore function
and enter a programme
number (e.g. 01)
3. Start the autostore function
? MENU return Help TV picture
Station table
Autostore
SAT programming OK
P + + -
AV
--/-
- P
1 2 3
4 5 6
7 8 9
0
A
B
TV
?
MENU
Station settings
6 9 8 - 0 3 B - G B
REC
Ȅ
yellow
blue
MENU return TV picture
Prog Logo Channel Signal
6 9 8 - 0 3 D - G B
ARD 06 Aerial
Autostore
Searching for stations Ch06
Press the yellow key to call the autostore function. Use
the numeric keys to enter the two-digit programme
number (e.g. 01) at which the station is to be stored.
After entry of this number, a red box with the text
„Start ?“ is displayed.
9
MENU
OK
0
1 2 3
4 5 6
7 8 9
The TV now scans through the entire reception range.
The first „standard-channel“ station to be found is
shown on the screen after all stations have been loca-
ted. The channel number and an automatic logo are
displayed. The auto logo only appears for stations
which transmit a VPS signal.
Now proceed as described in Section 3.1 Sorting
stations.
Prog Logo Channel Signal
6 9 8 - 0 3 C - S P - G B
Autostore
sort for
Germany
Austria
Switzerland
others
from nr. of progr. 0 1
start ?
OK
? MENU return Help TV picture
green
white
yellow
blue
yellow