Metz Elba 63 TD 61 - 100 MT - Manual (Page 49)

49
The picture quality of a video film can be impro-
ved in a terrestrial programme position with a
standard channel.
The video signal for this programme position
must be set to „Aerial“.
To ensure optimum picture quality the „VCR“
function must be switched on.
Set the „VCR“ function to „On“ with the
keys and press the
key to store the setting in
the programme position.
Press the key to return to the TV picture. TV
OK
+ -
1. Select the station table and
call the picture submenu
2. Call the second picture sub-
menu and adjust VCR
Programme Std Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
6 9 8 - 1 1 D - G B
EURO1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
Station table
—
—
—
—
Sound
—
—
—
—
S h a r p n e s s
N o i s e r e d u c t i o n
C T I
C o m b f i l t e r
f u r t h e r
1
A2
On
? MENU return Help TV picture
store ?
OK
red
green
white
yellow
blue
Programme Std Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
6 9 8 - 1 1 E - G B
EURO1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
Station table
—
—
—
—
Sound
—
—
—
—
store ?
OK
? MENU return Help TV picture
red
green
white
yellow
blue Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
0
0
0
4:3
On
- +
OK
13. Connecting peripheral equipment
Video recorders
Connecting a video recorder via the aerial socket
• Connect the aerial output (RF-out) of the video recorder to the aerial socket of your TV by means of the aerial cable.
• Load a recorded video cassette in the video recorder.
• Start playback or switch on the test pattern of the video recorder. The test pattern of most video recorders is located within the standard
channels Ch 30 to Ch 40 (see operating instructions of the video recorder).
• Execute a station search, beginning with standard channel 25. See Section 3. Presetting TV stations, station search.
• If the playback picture or the test pattern of the video recorder is displayed on the screen, then this channel can be stored. See Section
3. Presetting TV stations.
• In order to ensure optimum picture quality at all times, select the option „VCR On“. To do so, proceed as described below.
Press this key on the remote
control....
The screen displays Explanation
yellow
red
red
green