Metz Elba 63 TD 61 - 100 MT - Manual (Page 7)

7
Press this key on the remote
control....
The screen displays Explanation
2.2 Programme selection
1. Select the programme
position (e.g. Prog
number 10)
2. Next programme
With this key, you can switch back and forth between
the last two programme positions you selected.
Example:
You are watching a programme on ITN; during the
commercials, you switch to BBC with the aid of the
numeric keys
ᕪ . .ᕩ
You can now switch back and forth between ITN and
BBC by pressing the
key. PRG.
1 0 -/--
P
+
P
-
RTL
18:15:33
Pr 13 MONO
ZDF
BR3
RTL
SAT1
RTL2
PRO7
EUSPO
NTV
NORD3
MDR3
SWF3
Pr - -
3. Last programme
PRG.
Press the key when the TV is in standby mode.
The TV then switches to the programme viewed before
the receiver was turned off to standby.
Now enter the programme number with the numeric
keys. The TV is changed over to the selected programme
position as soon as the last digit has been entered.
With single-digit programme numbers it is only neces-
sary to press the corresponding key, e.g. key 4 for pro-
gramme position 4.
After the programme position has been selected an
information box appears indicating the programme
position number, the time, and the currently valid
sound mode, e.g. stereo.
-/--
Press the keys to run through the program-
mes. Keeping the or key depressed for more
than 2 seconds will cause a programme box to be dis-
played on the screen for selection of the programme
position. Release the
or key as soon as the
desired logo is highlighted in white. The corresponding
programme position will then be selected.
P - P +
P - P +
P - P
+