Mitel OpenPhone 27 User Manual
Page 24
Page 20
Auto-Answer
This feature can only be used when a headset is attached to the OP27 handset.
To enable or disable auto-answer:
This is not the internal OP27 headset auto-answer feature.
1. Long press the
key.
2. Press
No until Auto Answer? appears.
3. To enable Auto-Answer, press TurnOn.
4. To disable Auto-Answer, press TurnOff.
To answer a call when you hear ringback:
• Communicate by using the speaker and the microphone.
To terminate a call:
• Press
OR
. If the headset has an on/off-hook switch wired into the headset cord,
then release the switch.
To enable or disable headset auto-answer:
• Choose the Auto-Answer feature from the local mode internal menu.
See also other documents in the category Mitel Phones:
- 5330 IP Phone (57 pages)
- 5330 IP Phone (38 pages)
- 5330 IP Phone (1 page)
- 5602 (41 pages)
- Inter-Tel Axxess (32 pages)
- 5224 (80 pages)
- 5220 (32 pages)
- NETVISION PHONE (30 pages)
- 7000 (30 pages)
- 4001 (22 pages)
- ACCESSLINE 1000 (8 pages)
- M7208N (25 pages)
- USER GUIDE 8662 (74 pages)
- 5207 (26 pages)
- 5055 (97 pages)
- 8500 (60 pages)
- 8500 (66 pages)
- 7000 Series (20 pages)
- IP8820 (27 pages)
- M3902 (22 pages)
- 4150 (41 pages)
- M I T E L 8620 (74 pages)
- 8568 (86 pages)
- 5220 IP (46 pages)
- 8520 (76 pages)
- 5020 (32 pages)
- 6510 (2 pages)
- 4015 (26 pages)
- 5324 IP (56 pages)
- T7100 (20 pages)
- SX-200ML (10 pages)
- 5320 (84 pages)
- M3820 (22 pages)
- 8662 (78 pages)
- M2008 (24 pages)
- IP8830 (32 pages)
- 5560 IPT none (8 pages)
- 5235 IP Phone (42 pages)
- SX-200 (52 pages)
- 5212/5224 (59 pages)
- 5550 IP Console (84 pages)
- SIP USER AND ADMINISTRATOR GUIDE 5330 (58 pages)
- 5212 IP Phone (60 pages)
- 5215 (34 pages)
- 8660 (74 pages)