Mitel OpenPhone 27 - Manual (Page 20)

Page 16
Making and Answering Calls
To make a call:
1. Press .
2. Dial the number.
To pre-dial the number:
1. Dial the number (press the softkey to delete errors in the number).
2. Press OK.
To use the redial feature:
1. Short press of the key
2. Press to select Redial.
3. Press OK.
Answering a Call
To answer a call:
1. Press .
2. Press
;
to use the loudspeaker feature. You will hear the caller through the speaker on the
back of the handset. While an incoming call is being signalled, you can temporarily switch off
the ring tone with a short press of the key. The visual call signal is not affected.
Handsfree Operation
To use handsfree operation to make calls:
1. Press
;
.
2. Dial the number.
3. Set the handset down.
4. Communicate by using the speaker and the microphone.
To switch to handsfree operation during a call or to answer a ringing call in handsfree
mode:
1. Press
;
.
2. Set the handset down.
3. Communicate by using the speaker and the microphone.
4. To hang up press or .