Moxa Technologies MGATE EIP3000 DF1 - Manual (Page 17)

MGate EIP3000 Series User’s Manual Hardware: EIP3170, EIP3170I
3-7
Specifications
LAN
Ethernet 10/100 Mbps, RJ45, Auto MDI/MDIX
Protection Built-in 1.5 KV magnetic isolation
Serial Interface
Interface RS-232/422
No. of Ports 1 port
Connector Type DB9 (male) for RS-232, terminal block for RS-422
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Signals
RS-422: Tx+, Tx-, Rx+, Rx-, GND
Serial Line Protection 15 KV ESD for all signals
Serial Communication parameters
Parity None, Even, Odd
Data Bits 8
Stop Bits 1, 2
Flow Control RTS/CTS, DTR/DSR
Transmission Speed 1200 bps to 921.6 Kbps
Software Features
Utilities MGate Manager
Multi-Request 8 simultaneous EtherNet/IP clients with up to 16 simultaneous
requests per client
Protocol Ethernet: CIP (PCCC) on EtherNet/IP
Serial: DF1, Full-duplex
Power Requirements
Power Input 12 to 48 VDC
Power Socket Terminal block
Power Consumption EIP3170: 435 mA@12 VDC, 130 mA@48 VDC
EIP3170I: 555 mA@12 VDC, 140 mA@48 VDC
Environment
Operating Temperature 0 to 55°C (32 to 13 1°F), 5 to 95%RH
-40 to 75°C (-40 to 167°F), 5 to 95%RH for “-T” models
Storage Temperature -20 to 85°C (-4 to 185°F), 5 to 95% RH
Warranty 5 years