MITSUBISHI ELECTRIC WD-52527 - Manual (Page 19)

19
Chapter 1. Television Overview
Use this input to connect to EIA/CEA-861 compliant devices such as a high definition satellite receiver, cable box, or DVD
player. This input supports 480i, 480p, 720p and 1080i video formats. It is not intended for use with personal computers
or devices outputting video signals at computer resolutions, such as SVGA or XGA.
This input can also be used as a DVI connection with separate analog audio inputs. An optional HDMI-to-DVI adaptor or
cable will be necessary to make this connection and may be available from your local electronics retailer. When using the
optional HDMI-to-DVI adapter, the DVI analog audio inputs on your TV allow you to receive left and right audio from your
DVI device.
This input is High-Bandwidth Digital Copy Protection compliant (HDCP).
6. Output: Audio Output, Record Output
AUDIO OUTPUT sends analog audio of the program currently shown on the screen to an A/V surround sound receiver
or stereo system. Digital audio from digital channels, FireWire® (DTV Link/IEEE 1394) devices and HDMI devices is
converted to analog audio by the TV. If you do not have a digital A/V receiver, this should be the only audio connection
between the TV and your analog A/V receiver or stereo system.
RECORD OUTPUT sends analog audio and video to a VCR for recording purposes. These signals may not be the same
as those of the program that is currently being shown on screen. Signals from digital channels and FireWire (IEEE 1394)
devices are converted to analog signals. There is no video signal when copy restrictions are in effect. Audio alone is
output when Component 1, 2, or 3, or the HDMI input is selected for recording.
7. Service Port
This input is for use by Authorized Mitsubishi Servicers only or for authorized software updates.
8. DVI Analog Audio
Unlike HDMI, DVI does not carry audio information on the same cable. Use these analog stereo audio inputs when using
the HDMI input with a device that outputs DVI instead of HDMI.
Back Panel, continued
COMPONENT
YPbPr (480i/480p/720p/1080i) INPUT
1 2
S-VIDEO
VIDEO
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
DIGITAL
AUDIO
OUTPUT CableCARD™ USE WITH ANT 1 CARD TOP
1 2
Y
Pb
Pr
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
OUTPUT
AUDIO
OUTPUT
RECORD
OUTPUT
DVI
Analog Audio
1 2
VIDEO
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
SERVICE
PORT
MONITORLINK™/HDMI
VIDEO 480i/480p/720p/1080i
AUDIO PCM LINEAR
1 2
IEEE 1394
INPUT/
OUTPUT
Net Command
IR EMITTER
¸
'
,INK ¸
INPUT
3
DTV/CABLE/
VHF/UHF
USE WITH
CableCARD TM
ANT 1 / MAIN ANT 2 / AUX
WD-52528
WD-62528