Muratec F-520 - Manual (Page 44)

3-15 LDAP server settings
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
LDAP server settings
Modifying the LDAP server settings
If necessary, you can modify the existing LDAP server setting.
1
Press [Setting] on the control panel.
2
Press [Management], [Network Settings], [LDAP Settings], and [LDAP Server
Setting] in this order.
NOTE: Once you have reached this display, refer to the steps 2 to 5 in the page 3-2 and
3-3.
3
Press the LDAP server you want to modify.
4
Modify the items and press [Enter].
5
When you have finished press [Reset] on the control panel to return to the
Standby mode.