Philips MZ7-37 - Manual (Page 18)

18
English Notes:
– If you press any of the CD DIRECT PLAY
buttons, the system will play the
selected disc or track and the stored
program will be ignored temporarily. The
PROGRAM flag also will disappear
temporarily from the display. It will
reappear when playback of the selected
disc ends.
– REPEAT DISC mode will be cancelled
when program playback begins.
Erasing the program (when
playback is stopped)
• Press STOP.
™ “PROGRAM CLEARED” will be
displayed.
Note:
– The program will be erased when the
system is disconnected from the power
supply or when the CD carousel is
opened. If the CD carousel is opened,
the tracks belonging to the outer two
trays will be erased and the display will
show “TRACKS CLEARED”.
CD
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Reviewing the program
Reviewing of the program is possible only
when playback is stopped.
• Press
S or T repeatedly to
review the programmed tracks.
• Press STOP to exit review mode.
Playing the program
1 Press PLAY É to start program
playback.
™ “PLAY PROGRAM” appears on
the display.
™ The track number and elapsed
playing time of the current track will
appear on the display.
• If you press REPEAT during program
playback, the current track or all
programmed tracks will be played
repeatedly.
™ “TRACK” or "PROGRAM" will be
displayed.
™ The REPEAT and PROGRAM flags will be
displayed.
2 Press STOP to stop program playback.
Shuffle (only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ “SHUFFLE” will be displayed.
™ The
SHUFFLE flag, the disc and the
track selected at random appear on
the display.
• The discs and the tracks will be played
in random order until you press STOP.
• If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
™ “TRACK” or “ALL” will be
displayed.
™ The REPEAT and SHUFFLE flags will be
displayed.
2 Press SHUFFLE again to resume normal
playback.
™ The
SHUFFLE flag disappears from the
display.
Note:
– REPEAT DISC mode will be cancelled
when shuffle is selected.
Repeat (only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
1 Press REPEAT on the remote control to
select the various repeat modes.
™ “TRACK”, “DISC”, “ALL” or
“ OFF” will be displayed.
™ The REPEAT flag appears on the
display.
• The selected track, selected disc or all
available discs will now be played
repeatedly until you press STOP.
2 Press REPEAT until the " OFF" mode is
displayed to resume normal playback.
™ The
REPEAT flag disappears from the
display.
Notes:
– REPEAT DISC mode is not available
during program play or shuffling mode.
– You can also repeat shuffling a program.
™ “REPEAT TRACK“ or
“ REPEAT PROGRAM" will be
displayed.
™ The REPEAT , PROGRAM and SHUFFLE flags
appear on the display.