Philips MZ7-37 - Manual (Page 15)

15
English
Easy Set
EASY SET allows you to store all available
radio stations automatically.
1 Press and hold STANDBY•ON (on the
system only) for five seconds; when
the system is in standby or
demonstration mode.
™ “EASY SET” will be displayed,
and followed by “ TUNER” and then
“ AUTO”.
™ EASY SET will start searching for all
radio on FM band and then followed
by radio stations on AM band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band, if
there are still presets available, the
system will continue to store the AM
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will appear
on the display when EASY SET is
completed.
OPERATING THE SYSTEM
Switching the system ON
• Press STANDBY•ON (on the system
only), 3 CDC, TUNER, TAPE or CDR/
AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY•ON again or B on
the remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: 3 CDC, TUNER, TAPE or CDR/
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX/CDR IN terminals.
Dim Mode
This feature allows you to select 4 different
modes for display brightness.
• Press DIM to select the desired screen
display brightness: DIM 1, DIM 2, DIM 3
or DIM OFF.
™ The
DIM display lights up.
™ “DIM 1”, “DIM 2” , “DIM 3”
or “ DIM OFF” will be displayed
depending on the mode selected.
Volume Adjustment
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
MUTE (on remote control only)
This feature allows you to temporarily
switch off the sound without switching off
the system when you require a moment of
silence.
• Press MUTE on the remote control to
switch off the sound.
™ “MUTE” will be displayed.
• Press MUTE again on the remote
control or increase the VOLUME level to
switch on the sound.
BALANCE L/R (on remote control only)
Adjust the sound balance of the left and
right speakers.
• Press BALANCE L/R on the remote
control to adjust the sound of the front
Left or Right speaker respectively.
™ The display will show “LEFT X“,
“ BALANCED“ or “RIGHT X“.
Note:
– "X" denotes the sound level.
Digital Control
The Digital Control feature enables you to
adjust the system to suit your type of music.
INCREDIBLE SURROUND
Normal stereo sound is determined by the
distance between the front speakers.
When Incredible Surround is switched on,
it magnifies the virtual distance between
the front speakers for an incredibly wide,
enveloping, stereo effect.
• Press INCREDIBLE SURROUND to
switch on.
™ The
INCREDIBLE SURROUND display lights
up.
™ “INCREDIBLE SURROUND
ON” will be displayed.
To switch off Incredible Surround
• Press INCREDIBLE SURROUND again.
™ The INCREDIBLE SURROUND display is
switched off.
™ “INCREDIBLE SURROUND
OFF” will be displayed.