Rinsing the system 43, Cleaning and care, Rinsing the system – Miele CVA 3650 EN User Manual
Page 43
Miele branded cleaning and
conditioning products are available
from the Miele Spare Parts Department
or via the internet on
www.miele-shop.com.
Always allow the machine to cool
down before cleaning. Please be
aware that the water in the drip tray
will be hot. Danger of scalding.
Before cleaning the interior, switch
the machine off with the master
switch (top left hand side). Danger
of injury!
Do not clean the inside of the
capsule plate opening. Danger of
injury.
Do not clean the machine with a
steam cleaner as this will damage
the machine.
Do not use cleaning agents
containing chlorides, acids, soda or
scouring agents. These would
damage the surface.
It is important to clean the machine
regularly, as the any coffee remains will
soon go mouldy.
All removable parts can be cleaned in
the dishwasher except for:
– The capsule plate
– The plastic grille
If the parts are cleaned frequently in a
dishwasher, they can become
discoloured from regular contact with
food residues (e.g. tomatoes).
Rinsing the system
Before switching the machine off for
any length of time, the pipework, brew
system, spout and steam valve need to
be cleaned.
If coffee has been dispensed, the
machine will carry out a short rinse
automatically before it switches off.
Place a suitable container under the
spout and the steam valve.
Maintenance
K1 K2 K3 K4 K5 L o n
G
k
C
^ Use the right arrow sensor to
highlight the maintenance symbol
and then touch the OK sensor.
^ Select "Rinse the system" and touch
the OK sensor.
Water will run out of the spout.
^ Open the steam valve.
Water will run out of the steam valve.
^ Close the steam valve a few seconds
later.
The system has now been flushed
through and the machine can be
switched off.
Cleaning and care
43