MaxTech NX-16 - Manual (Page 3)

1
Contents
Section One - Introduction ......................... 1
Section Two - Installation ........................... 2
Section Three - Driver Installation .............. 7
Section Four - Troubleshooting .................. 7
Section Five - Cable Information .............. 9
Section Six - Specifications ..................... 10
Section Seven - Technical Support ............. 11
Section Eight - Warranty, FCC And Other
Information ........................ 12
Section One - Introduction
Maxtech’s NX-16 Series network adapt-
ers are high performance, software configurable
Ethernet network adapters. Software configura-
tion provides many advantages over conventional
hardware configured products, including ease of
installation, auto-configuration, and convenient
re-configuration. There is no need to set numerous
and unfamiliar jumpers when installing or re-
configuring the network card. The included setup
program can either automatically select valid I/O
and IRQ addresses when a conflict is detected, or
custom-configure the adapter using parameters of
your choice.
The NX-16 Series network adapter cards
are Industry Standard Architecture (ISA) compat-
ible products and can be used in any IBM PC/XT/AT
or other fully compatible computer. The adapters are
NE-2000 compatible and include a 16KB RAM
buffer for faster network transmission and reception.