Metrologic Instruments StratosS MS2220 - Manual (Page 71)

65
D EFAULT S ETTINGS
C OMMUNICATION P ARAMETERS
Default settings for “Aux” interface
The secondary scanner and the MS2220 series always communicates via RS232. Data is relayed to the host via various
primary interfaces
P ARAMETER D EFAULT OCIA RS232 IBM 46 XX USB
Aux Baud Rate 38400 9 9 9 9
Aux Parity none 9 9 9 9
Aux Data Bits 8 9 9 9 9
Aux Stop Bits 1 9 9 9 9
Aux Character RTS * 9 9 9 9
Aux Message RTS 9 9 9 9
Aux Ack/Nak * 9 9 9 9
Aux Xon/Xoff * 9 9 9 9
Aux D/E Commands 9 9 9 9
Aux M/O Commands 9 9 9 9
Aux F/L Commands 9 9 9 9
Aux Intercharacter Delay 1 msec 9 9 9 9
Aux Port Data Format
None
(Disabled)
9 9 9 9
Aux Port to StratosSCHOOL †
None
(Disabled)
9 9 9 9
† When the Aux Port connects to a host port, the Aux Port Data Format should be disabled (requires cable MLPN 57-57008x-N-3).