MicroBoards Technology QD-123 - Manual (Page 9)

9
Copying – 52x 18%
150.4MB 01:15
3.0 Copy
OK: 07
Compare OK: 7
Fail: 0 Diff: 0
Tgt: 00 CD-RW
Identical
When this operation completes, the unit will start the Copy
process:
When the job is completed, the recorded discs will be ejected from the
recorder drives. The display will read:
Verify
The Verify function will check to see if the recorded disc can be read. This is different from
the Compare function. The Verify function will not compare itself with the master disc. It is
only checking to see if the disc that was recorded can be read back.
To run the Verify function, press the ▼▲ buttons until the display reads:
Place the copied discs into the CD Recorder drives.
Press the ENT button on the controller interface.
The copied discs will now be read. Once completed, the display will show:
Compare
The Compare function is used to compare the master disc with the copied disc. The
Compare function will only work with Data masters. If your master disc has audio or video
(VCD) on it, the Compare function will not work.
To use the Compare function, press the ▼▲ buttons until the display reads:
Place your master disc into the CD reader drive.
Place your copied discs into the CD Recorder drives.
Press the ENT button on the controller interface.
The duplicator will now compare the master and copied discs.
When completed, the display will read:
Press the ▼ button and the following screen will appear:
Press the ▼ button again and the following screen will appear,
displaying the status of the first drive:
Press the ▼ button again to check the status of the second
drive, and again for the third.
Prescan
The Prescan function is used to verify the master disc can be read correctly.
To use the Compare function, press the ▼▲ buttons until the display reads:
Place the master disc into the CD reader drive and press ENT.
The prescan starts and the following screen appears:
Once the scanning is complete, the following screen will appear:
Disc Info
The Disc Info function displays information on the type of master disc placed in the TOP
reader drive.
To use the Disc Info function, press the ▼▲ buttons until the display reads:
4. Verify
4. Verify
OK: 07
5. Compare
6. Prescan
Src:01 CD-RW
Total: 15.2MB
Scaning – 24x 15%
620.4MB 02:15
PreScan OK!
7. Disc Info