MicroBoards Technology QD-123 - Manual (Page 17)

17
CD+G
The CD+G feature, when set to ON in the Advanced Setup Menu, will allow you to copy a
CD+G Karaoke master disc. The default setting is OFF.
Important Note : The CD+G value must be set to OFF to use the Track Extraction
feature.
To enable CD+G duplication, perform the following steps:
1. Press and HOLD the ESC button for 3 seconds to enter the Advanced Setup Menu
2. Press the UP or DOWN arrows until the display reads 10-9: Adv Setup CD+G
3. Press ENT to adjust the CD+G setting
4. Use the UP or DOWN arrows to alternate the setting between ON and OFF
5. Press ENT when ON is displayed to enable CD+G duplication
6. Press ESC to exit the Advanced Setup Menu
7. Use the UP or DOWN arrow to return to Copy mode
ISRC & MCN
The ISRC (International Standard Recording Code) & MCN (Media Catalog Number) feature
allows you to copy this information from a CD audio master to the blank disc. The default
setting is OFF.
USB Option
This function is not used in the QD-MultiDrive Series.
CD Text
This feature allows CD-Text content to be copied from master to blank. The default is OFF.
Disc Counter
This feature allows you to view the number of successful and unsuccessful burns. The JC OK
entry is for successful burns for the entire unit; you can also view the individual drive
performance by using the ▼▲ buttons.
Update Drive F/W
This feature is not used by the QD- MultiDrive.