Metrologic Instruments MS6200 - Manual (Page 23)

19
A PPENDIX A
Specifications
O PERATIONAL
Light Source
Visible Laser Diode 650 nm ± 10 nm or
675 nm ± 5 nm
Laser Power 0.75 mW (peak)
Depth of Scan Field
0 mm – 64 mm (0” – 2.5”) for 0.33 mm (13 mil) bar
code at default setting
Scan Speed 72 ± 2 scan lines per second
Scan Pattern Single scan line
Minimum Bar Width 0.102 mm (4.0 mil)
Decode Capability
Autodiscriminates all standard bar codes; for others
call Metrologic
System Interfaces
RS232, Keyboard Wedge, Light Pen Emulation, IBM
468X/469X, OCIA, Stand Alone Keyboard
Print Contrast 35% minimum reflectance difference
Number Characters
Read
Up to 80 data characters
(Maximum number will vary based on symbology and
density)
Roll, Pitch, Yaw 42°, 68°, 52°
Beeper Operation 7 tones or no beep
Indicators (LED)
Green = laser on, ready to scan
Red = good read
M ECHANICAL
Length 178 mm (7.00”)
Width-Handle 48 mm (1.9”)
Width-Head 70 mm (2.7”)
Weight 121 g (4.2 oz)
Cable Standard 2.1 m (7’) straight; optional 2.7 m (9’) coil