Troubleshooting – Meridian America 507 User Manual

Page 33

Troubleshooting

This section describes problems you may encounter when using

the compact disc player, and includes suggested solutions.

If these suggestions fail to cure the problem, please contact

your Meridian dealer for further assistance.

No lights are displayed when
switching on

❍ Check that your AC power supply is connected correctly.

❍ Check that the ON OFF switch on the back panel

is in the ON position.

❍ Check that the fuse on the compact disc player

back panel and the fuse in the unit’s power plug

The tray will not open

❍ Check that the standby display is shown.

If the standby display is shown:

❍ Switch off the compact disc player and disconnect it from the

AC power supply.

❍ Restore power to the compact disc player.

❍ Try again to open the disc tray.

There is no sound when playing a disc

❍ Check that your preamplifier is switched on, and the volume is

at an appropriate level.

❍ Check that the compact disc player is connected correctly to

❍ Check that the correct source has been selected on your

preamplifier.

❍ Try playing another disc. If this disc works, check the problem

disc for signs of dirt or damage.