Meridian America 507 - Manual (Page 14)

Using the compact disc player
9
Switching on and off
During normal use the compact disc player should be left in the
standby state. This uses a negligible amount of electricity, but
ensures that the components of the compact disc player
operate at maximum efficiency from the moment you start
playing a disc.
If you are not going to use the compact disc player for a period
of several days you should switch the unit completely off, at the
back panel, and disconnect it from the AC power supply.
To switch on from standby
● Press Open, *, =, or > (front panel), or select a source on
the remote.
To insert a disc
● Press Open (front panel) to open the drawer.
● Place your disc, label side up, in the tray as shown opposite.
● Press Open (front panel), Function * (remote), or > to close
the tray.
To switch to standby
● Press Off.
The display will show:
.
If you have other Meridian 500 Series equipment connected to
the compact disc player, these units will also switch to standby.
If a disc is currently playing, switching to standby will stop the
disc, and the disc can safely be left in the unit.