Milan Technology MIL-SM801XX - Manual (Page 24)

Speed Config
In the Speed Configuration Page, you can configure the speed and duplex of
each port.
Fig. 5-4. The Speed Config Page
To select the speed parameters for a port:
1. Select the drop-down menu in Speed/Duplex Column.
2. Select one of the following 6 Items: Auto/flow control enabled, Auto/flow control
disabled, 100Base-Tx/Full Duplex, 100Base-Tx/Half Duplex, 10Base-T/Full
Duplex, 10Base-T/Half Duplex.
3. Click Apply.
20