Metz 42TN92 - Manual (Page 20)

- 50 -
Contrast
Brightness
R
G
32
30
46
32
Colour Temp Normal
Reset
B 32
PC PICTURE
Contrast, Brightness and Colour Tempera-
ture adjustments in this menu are identical
to adjustments defined in TV picture menu.
When Colour Temp is Manual, you can also
adjust the R,G,B items. R, G and B adjust
the TV image colour in PC mode. You can
change the TV colour to your desired colour:
R (Red), G (Green), B (Blue)
Select Reset and press _ / ` or “OK” button to re-
set the picture modes to factory default settings.
Sound Menu
By pressing _ / ` button, select the third icon.
Sound menu appears on the screen.
The items in this menu are described at
Sound menu starting page 43.
Feature Menu
By pressing _ / ` button, select the fourth
icon. Feature menu appears on the screen.
The items in this menu are described at
Feature menu starting page 45.
Source Menu
By pressing _ / ` button, select the fifth icon.
Source menu appears on the screen.
In source menu, highlight a source by
pressing
a / b button and switch to that
mode by pressing _ / ` or “OK”button.
Sound in PC mode
• Connect the PC’s Audio output to the TV’s
PC Audio In socket with an audio cable.
Other Features
TV Status
Programme Number, Programme Name,
Sound Indicator and Zoom Mode are dis-
played on the upper right side of the screen
when a new programme is entered but-
ton is pressed.
Mute Indicator
It is placed in the upper left side of the
screen when enabled.
To cancel mute, there are two alternatives;
the first one is pressing the button and
the second one is increasing/decreasing
the volume level.
PIP and PAP modes
Press the button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
size and
4 positions (upper left, upper right,
bottom left and bottom right)(optional) avail-
able for the PIP window. You can use
button to change the PIP position. Aspect
Ratio of the PIP window is fixed and 4:3.
When PIP Mode is entered, the default active
window is PIP window and the active win-
dow is indicated by a white frame around it.
The active window can be changed by
pressing
_ / ` button. The status info OSD
belongs to active window. The place of the
status OSDs are same for both windows.
By pressing "P+" or "-P" button or directly
entering the channel number, you can watch
the channel you want at the active window.
Press the AV button to select the source for
active window.