Metz 42TN92 - Manual (Page 15)

- 45 -
Dynamic Bass
Dynamic Bass is used to increase bass ef-
fect of the TV set.
By pressing a / b button, select Dynamic
Bass. By pressing _ / ` button set Dynamic
bass to Low, High or Off. It is not recom-
mended to select High if listening at high
volume levels. There is a subwoofer output
that can accept an active subwoofer if you
wish to create very high levels of Bass.
Subwoofer is active only if Dynamic Bass is
set to Off.
SubWoofer
It is possible to connect an external, active
subwoofer to the set to give a much deeper
bass effect.
By pressing a / b button, select Subwoofer.
Subwoofer can be set to On or Off.
Dynamic Bass is not available if Subwoofer
is set to On.
Set Subwoofer to On when you connect an
external subwoofer to the set.
3D Panorama
This function creates a 3-dimensional
sound by using your 2 existing loudspeak-
ers on your TV set. It does not need any ad-
ditional center or surround speakers. You
must be close to your TV set (about 3
meters) and be in front of it to hear the
3D
Panorama effect better.
If 3D Panorama is set to on, equalizer, AVL
and effect become inactive and can not be
accessed.
Feature menu
By pressing _ / ` button, select the third icon.
Feature menu appears on the screen.
Sleep Timer
Child Lock
Language
Ext-2 Out
Default Zoom
Off
Off
English
EXT - 1
Panoramic
Menu Background Translucent
Menu Timeout 30 sec
Teletext Language West
FEATURE
Screen Saver
Sleep Timer
By pressing a / b button, select Sleep
Timer. The timer can be programmed be-
tween Off and 2 hours in steps of 10 min-
utes by pressing
_ / ` button. If sleep timer
is activated, at the end of the selected time,
the TV
automatically goes into stand-by
mode.
Child Lock
You can use this feature to prevent children
from turning the TV on or changing pro-
grams or adjustments etc. without remote
control.
The child lock feature can be set by _ / ` but-
ton to either on or off. When off is selected,
there will be no difference in the operation of
your TV. When on is selected, the TV can
only be controlled by the remote control
handset. In this case the control panel but-
tons, except the Power on/off button, at the
bottom of the TV will not work. If one of these
buttons is pressed, “Child Lock On” will be
displayed on the screen.
Language
By pressing a / b button, select Language.
By pressing _ / ` button, you can select the
language.