Motorola Pro FLX User Manual
Page 14
12
Battery Information
NOTE: The battery door is hinged and does not need to
be removed.
Your ADVISOR Pro FLX pager is designed to operate
with a single AAA-size alkaline battery (carbon zinc
batteries are not recommended). See the diagram for the
battery door location.
To install or replace the battery, place the pager face
down and proceed as follows:
➊
Unlock the battery door by sliding the door latch
away from the battery door.
➋
Slide the battery door in the direction of the arrow
(toward the outer edge).
➌
Lift the end of the battery door up from the housing.
Slide the battery out of the battery compartment
taking note of the positive (+) and negative (-)
markings on the battery and the pager housing.
To install a new battery, reverse this procedure taking
note of the positive (+) and negative (-) markings.
CAUTION: Do not insert the battery backwards or the
messages stored or locked in memory will be erased.
Ì
➊
➋
➌
ADVISOR Pro FLX Pager
Battery Replacement (rear view)
1027B25A.FRA Page 12 Thursday, December 5, 1996 10:59