Setting line ring type and delay, Ip8820 nortel ip phone user guide – Mitel IP8820 User Manual
Page 19
IP8820 Nortel IP Phone
User
Guide
To set the ring type for the phone:
o
Press the Setting (
) button.
o
Dial 3, or move the cursor to
3.Phone Settings
using the
Previous
-
Next
softkeys and press the
OK
softkey.
o
Dial 2, or move the cursor to
2.Ring Setting
using the
Previous
-
Next
softkeys and press the
OK
softkey.
o
Dial 1, or move the cursor to
1.Default Ring Type
using
the
Previous
-
Next
softkeys and press the
OK
softkey. An
asterisk,
», displays in front of the current setting.
Ring Setting
>1.Default Ring Type
14
Apr.
‘09
Default Ring Setting
*Type1
Previous
Play
Next
OK
Next
OK
o
Select the ring type using the
Next
softkey. Press the
Play
softkey to hear the selected tone.
o
Press
the
OK
softkey to save the selected the ring type.
o
Move to another parameter with the navigation buttons and
continue the session or press the Setting (
) button to exit the configuration session.
5.2.2. Setting Line Ring Type and Delay
You can assign each line with a different ring type to distinguish which line is ringing. Selections for the
type include one of fourteen tones, “Ringer Off”, or “Set to Default”, see
. Of the fourteen
tones, five are permanently stored in the memory of the phone and the remaining five must be
downloaded before use. In addition, for each line the ring signal can be immediate or delayed. The delay
is set in 1 second increments from 0 (no delay) to 10 seconds.
To set the ring type for a line:
o
Press the Setting (
) button.
o
Dial 3, or move the cursor to
3.Phone Settings
using the
Previous
-
Next
softkeys and press the
OK
softkey.
Ring Setting
>2.Line 1 Settings
o
Dial 2, or move the cursor to
2.Ring Setting
using the
Previous
-
Next
softkeys and press the
OK
softkey.
Previous
Next
OK
Ring Type (1)
*Set to Default
Play
Next
OK
Line 1 Configuration
>1.Ring Type
o
Enter the line number plus 1 (for line 1 dial 2 for line 2 dial 3,
etc.), or move the cursor to
2.Line
n Configuration
using
the
Previous
-
Next
softkeys to select the line number n and
press the
OK
softkey.
o
Dial 1, or move the cursor to
1.Ring Type
using the
Previous
-
Next
softkeys and press the
OK
softkey. Note
the line number displays in parenthesis after “Ring Type”.
Previous
Next
OK
o
Select the ring type using the
Next
softkey. Press the
Play
softkey to hear the selected tone. An asterisk,
», displays
in front of the current setting.
o
Press
the
OK
softkey to save your entry.
o
Move to another parameter with the navigation buttons and continue the session or press the
Setting (
) button to exit the configuration session.
To set delayed ring for a line:
o
Press the Setting (
) button.
o
Dial 3, or move the cursor to
3.Phone Settings
using the
Previous
-
Next
softkeys and press the
OK
softkey.