Open vpn – Moxa Technologies UC-7420/7410 User Manual
Page 69
UC-7420/7410 User’s Manual
Managing Communication
4-17
20: system.9.1.3.4
(octet string)
The MIB module for managing IP and ICMP implementations
21: system.9.1.3.5
(octet string)
The MIB module for managing UDP implementations
22: system.9.1.3.6
(octet string)
View-based Access Control Model for SNMP.
23: system.9.1.3.7
(octet string)
The SNMP Management Architecture MIB.
24: system.9.1.3.8
(octet string)
The MIB for Message Processing and Dispatching.
25: system.9.1.3.9
(octet string)
The management information definitions for the SNMP User-based Security Model.
26: system.9.1.4.1
(timeticks)
0 days 00h:00m:00s.04th (4)
27: system.9.1.4.2
(timeticks)
0 days 00h:00m:00s.09th (9)
28: system.9.1.4.3
(timeticks)
0 days 00h:00m:00s.09th (9)
29: system.9.1.4.4
(timeticks)
0 days 00h:00m:00s.09th (9)
30: system.9.1.4.5
(timeticks)
0 days 00h:00m:00s.09th (9)
31: system.9.1.4.6
(timeticks)
0 days 00h:00m:00s.19th (19)
32: system.9.1.4.7
(timeticks)
0 days 00h:00m:00s.22th (22)
33: system.9.1.4.8
(timeticks)
0 days 00h:00m:00s.22th (22)
34: system.9.1.4.9
(timeticks)
0 days 00h:00m:00s.22th (22)
***** SNMP QUERY FINISHED *****
NOTE
Click on the following links for more information about MIB II and RS-232 like group:
Æ UC-7420/7410 does NOT support SNMP trap.
The following tables list the variables supported by UC-7420/7410.
Open VPN
This function is only available for firmware version V1.5 (and later versions).
OpenVPN provides two types of tunnels for users to implement VPNS: Routed IP Tunnels and
Bridged Ethernet Tunnels. Here we describe the second type of tunnel. To begin with, check to
make sure that the system has a virtual device /dev/net/tun. If not, issue the following command:
# mknod /dev/net/tun c 10 200
An Ethernet bridge is used to connect different Ethernet networks together. The Ethernets are
bundled into one bigger, “logical” Ethernet. Each Ethernet corresponds to one physical interface
(or port) that is connected to the bridge.
On each OpenVPN machine, you should generate a working directory, such as /etc/openvpn,
where script files and key files reside. Once established, all operations will be performed in that
directory.