36 timer recording (cont’d) – Philips Magnavox VRX562AT User Manual
Page 36
ONE TIME PROGRAM
PROGRAM
1
CHANNEL
10
TIME ON
09:30 PM
TIME OFF
11:00 PM
REC SPEED
SLP
SP=1 LP=2
SLP=3
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
36 Timer Recording (cont’d)
8
Press the Number 1 button to record in SP speed, press
the Number 2 button to record in LP speed, or press the
Number 3 button to record in SLP speed. (For details, see
the chart below.) You cannot use the (Tape) SPEED button at this
time.
9
Press two Number buttons for the month and two
Number buttons for the day you want to record the pro-
gram. For example, for July 10, 1997, press 07, 10. The day of
the week and the year will appear automatically (you cannot pro-
gram the VCR to record more than one year in advance).
ONE TIME PROGRAM
PROGRAM
1
CHANNEL
10
TIME ON
09:30 PM
TIME OFF
11:00 PM
REC SPEED
SLP
START DATE
07/10/97
THU.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF VCR FOR TIMER RECORDING
will appear on-screen (if PROGRAM NOT COMPLETED appears,
try again from step 1). In three seconds the on-screen display will
disappear.
8
11
Turn off the VCR power. The Timer light will appear. The
VCR must be turned off for a timer recording to take
place. (If the timer recording will take place several hours or days
from now, you may use the VCR until time for the recording. Just
turn off the VCR a few minutes before the recording starts.)
If you forget to turn off the VCR, PLEASE TURN OFF VCR FOR
TIMER RECORDING flashes on your TV screen two minutes
before a timer recording starts. Remove the message by pressing
the CLEAR button.
Tape Speed
Maximum Record/Playback Time
Type
T160
T120
T60
SP
2 hrs.
2 hrs.
1 hr.
(Standard Play)
40 mins.
LP
5 hrs.
4 hrs.
2 hrs.
(Long Play)
20 mins.
SLP
8 hrs.
6 hrs.
3 hrs.
(Super Long Play)
Tape Speeds
This chart shows the recording/playback time
for three types of video cassettes (T160, T120,
and T60). There are three playback speeds: SP,
LP, and SLP. During playback, the VCR selects
the tape speed automatically. When recording,
you can change the tape speed using the
(Tape) SPEED button (see pages 25 and 31).
The VCR must
be off for a
timer recording
to take place!
Make sure there
is a tape in the
VCR.
9
10
11
CBL/DSS
VCR
TV
PAUSE
/STILL
POWER
VCR PLUS+
/ENTER
F.ADV
SLOW
STATUS/EXIT
CLEAR
MENU
VOL
CH
1
4
7
100
2
5
8
0
3
6
9
A.CH
REC/OTR
SPEED
INDEX
SEARCH
SKIP
SEARCH
VCR/TV
MEMORY
EJECT
X2 PLAY
VAR.SLOW
TRACKING
TIME SEARCH REC END SEARCH
MUTE
JOG & SHUTTLE
C
C
V
V