34 timer recording, Helpful hints, Channels are programmed – Philips Magnavox VRX562AT User Manual
Page 34: The clock is set, Press the vcr button, then press the menu button, Press the number 1 button to select program, Select a once, daily or weekly recording
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
SELECT PROGRAM NUMBER
TO END PUSH EXIT
34 Timer Recording
Follow the steps below to program your VCR to record TV pro-
grams while you’re away from home. You can program up to eight
timer recordings. For each one, the VCR will turn itself on,
record, and turn itself off automatically. Before you begin make
sure:
●
Channels are programmed.
●
The clock is set.
●
There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
●
The VCR is in VCR position. The VCR light will appear on the
display panel when the VCR is in VCR position. If the VCR light
does not appear, press the VCR/TV button once.
Do each step within 60 seconds of completing the previ-
ous step. If you don’t, you may start again at step 1.
1
Press the VCR button, then press the MENU button.
2
Press the Number 1 button to select PROGRAM.
TO SELECT PUSH NO. SHOWN
1 ONCE
2 DAILY
3 WEEKLY
4 PROGRAM REVIEW
TO END PUSH EXIT
3
Select a once, daily or weekly recording.
●
Press the Number 1 button to select ONCE. The VCR
will record a TV program on any day you choose, up to 12
months away.
●
Press the Number 2 button to select DAILY. The VCR
will record every day from Monday to Friday – starting at the
same time and for the same length of time.
●
Press the Number 3 button to select WEEKLY. The VCR
will record on the same day, at the same time, and for the same
length of time every week.
Daily
Recording
Menu
Screen
1
2
3
• If you need to make a correction
while programming a timer record-
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter the
correct information.
• If you are not using the Cable Box
Controller, you must set CABLE
BOX CONTROLLER to OFF. Details
are on pages 38 - 39.
Helpful Hints
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
5 CABLE BOX CONTROLLER
6 REMOTE LOCATOR
TO END PUSH EXIT
CBL/DSS
VCR
TV
PAUSE
/STILL
POWER
VCR PLUS+
/ENTER
F.ADV
SLOW
STATUS/EXIT
CLEAR
MENU
VOL
CH
1
4
7
100
2
5
8
0
3
6
9
A.CH
REC/OTR
SPEED
INDEX
SEARCH
SKIP
SEARCH
VCR/TV
MEMORY
EJECT
X2 PLAY
VAR.SLOW
TRACKING
TIME SEARCH REC END SEARCH
MUTE
JOG & SHUTTLE
C
C
V
V