Philips Magnavox VRX562AT - Manual (Page 26)

TO SELECT PUSH NO. SHOWN
1 ON SCREEN ON ON
2 COUNTER ONLY
3 ON SCREEN OFF
TO END PUSH EXIT
26 On-Screen Status Displays
• If the channel you select has no
broadcast, the screen will become
solid blue. The screen will remain
blue until you select an active chan-
nel.
• You may bring up the status display
at any time by pressing the STA-
TUS/EXIT button.
(The exception is when viewing a
still picture or a slow motion picture,
or when Fast Forward or Rewind is
pressed during playback.)
• Channel numbers (when tuned) are
displayed for a few seconds.
Helpful Hints
1
Press the VCR button, then press the MENU button to
bring up the main menu display.
A status display, which includes the current time, channel, and other
information (see illustration), will appear when you press the STA-
TUS/EXIT button or certain function buttons. The contents of the sta-
tus display may vary. There are three status display modes:
ON SCREEN ON:
● Whenever you press the STOP button or the PLAY button, the sta-
tus display will appear for five seconds.
COUNTER ONLY:
● Whenever you press the STOP button or the PLAY button, the sta-
tus display will appear for five seconds. After five seconds, only the
counter will remain on-screen. You must press the STATUS/EXIT
button to remove it.
ON SCREEN OFF:
● The status display will not appear when you press function buttons.
You must press the STATUS/EXIT button to see the status display.
To choose the status display mode, follow the steps below.
2
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 REPEAT PLAY OFF
2 ON SCREEN MODE
3 AUDIO OUT
4 LANGUAGE
5 VCR PLUS+ REF. MAP
TO END PUSH EXIT
3
Press the Number 2 button to select ON SCREEN MODE.
4
Press the Number 1 button to select ON SCREEN ON, the
Number 2 button to select COUNTER ONLY, or the
Number 3 button to select ON SCREEN OFF. ON will appear
beside the selected status display mode.
5
Press the STATUS/EXIT button to exit.
STOP 12:00 AM
TV STEREO CH10
STEREO
2ND AUD
SLP M 1:23:45 HIFI
Function
Button
Pressed
Time Channel
Counter
and
Counter
Memory Tape
Speed
MTS
Broadcast
Available
Audio
Out
Mode
Receiving and
Recording Mode
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 SET CLOCK
5 CABLE BOX CONTROLLER
6 REMOTE LOCATOR
TO END PUSH EXIT