Recording 31 – Philips Magnavox VRX562AT User Manual
Page 31
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
Recording 31
2
Insert a tape with its record tab intact (see page five) in the
VCR. The power will come on, and the Cassette-Inside light will
appear.
4
If the VCR light appears on the display panel of the VCR, go to
step 5. If the VCR light does not appear, press the VCR/TV
button once.
• If the REC(ord)/OTR button is
pressed when there is not a tape in
the VCR, NO CASSETTE will flash
on-screen.
• If the REC(ord)/OTR button is
pressed while a tape without a
record tab is in the VCR, the VCR
will eject the tape and PROTECTED
CASSETTE CANNOT RECORD will
flash on-screen.
• Other recording options are on
pages 32 - 44.
• You can change the tape speed
while the VCR is recording, but
some distortion will appear on the
tape.
• The VCR will record in a preset vol-
ume.
Helpful Hints
5
Press the (Tape) SPEED button on the remote control until
the desired tape speed (see page 36) appears on the TV screen.
The tape speed will disappear from the screen after about five
seconds.
6
Use the CH(annel) Up/Down buttons or the Number but-
tons to select the channel to be recorded.
7
Press the REC(ord)/OTR button once to start recording.
8
To pause the recording (for example, during commer-
cials), press the PAUSE/STILL button once. To start
recording again, press the REC(ord)/OTR button or the
PAUSE/STILL button again.
9
To stop recording, press the STOP button.
1
Turn on the TV.
2
Insert a tape in the VCR.
4
5
6
7
8
9
3
Press the VCR button on the remote control.
3
CBL/DSS
VCR
TV
PAUSE
/STILL
POWER
VCR PLUS+
/ENTER
F.ADV
SLOW
STATUS/EXIT
CLEAR
MENU
VOL
CH
1
4
7
100
2
5
8
0
3
6
9
A.CH
REC/OTR
SPEED
INDEX
SEARCH
SKIP
SEARCH
VCR/TV
MEMORY
EJECT
X2 PLAY
VAR.SLOW
TRACKING
TIME SEARCH REC END SEARCH
MUTE
JOG & SHUTTLE
C
C
V
V