MITSUBISHI ELECTRIC DX-TL4U User Manual
Page 56
User’s Manual
46
Main Monitoring Setup Screen
You can adjust the display dwell time for each camera displayed on the main monitor. You also can
set the video from the event-detected camera to be displayed on the main monitor during the preset
dwell time.
Figure 63 — Main Monitoring Setup screen.
Highlight the box beside Sequence Dwell Time and press the button. You can adjust the
sequence dwell time from 3 to 60 seconds.
NOTE: The DVR does not sequence the camera having video loss.
Highlight the box beside Event Monitoring and press the button to toggle between On and Off.
When it is On, video from the lowest camera number among those connected with the
event-detected sensor will be displayed full-screen on the main monitor for the preset dwell time.
Highlight the box beside Event Monitoring Dwell Time and press the button. You can adjust
the event monitoring dwell time from 3 to 60 seconds.