Meridian America G68 - Manual (Page 57)

D S P p r e s e t s
5 3
The G68 Digital Surround Controller allows you to modify any of
the built-in presets, and save them for future use.
You can either save the changes to the built-in preset, or you can
create up to 10 presets of your own, with names of your choice, so
you can use them alongside the built-in presets.
To save the preset settings
• Make sure the menus are unlocked; see To run the Configuration
Wizard, page 25.
• Press DSP to select the preset you want to modify.
• Change the preset parameters to the values you want to store.
• Press More then Store, or Function + Store on the MSR+.
The display shows the next available user-defined preset. For
example:
Store цхъ утф
Pick Preset
to overwrite User 1
• If you want to overwrite an existing user-defined preset press A
to select the preset you want to overwrite.
For example:
Store цхъ утф
Pick Preset
to overwrite Classical
Alternatively press V to choose the built-in preset you started
with. For example:
Store цхъ утф
Pick Preset
to overwrite Trifield
• Press Store.
The settings have been stored in the new or existing preset you
selected.
If you are defining a user preset you can now edit the name of the
preset if you wish.
A flashing cursor shows the letter you are editing:
мо пс утф Store öõú
Write label
for preset U ser 1
• Press > or < to select the character position you want to edit.
• Press A or V to change the character.
Each press steps through the sequence A to Z, a to z, 0 to 9, full
stop, and blank. You can also select a blank directly by pressing
Clear on the MSR+.
Defining your own presets
G Series DSP 53 31/10/03, 4:24:43 pm