Meridian America G68 - Manual (Page 30)

C o n f i g u r i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
2 6
The digital surround controller provides several alternative standard
settings, called Types, which configure all aspects of the product
into the most commonly needed configurations.
Choosing one of the Types overrides any other configuration you
may have performed, and so can be used to reset the configuration
of the unit.
To reset the configuration
• Press Wizard.
The display shows the title screen for stage 1:
Enter Skip Back
Press More for help
1: Reset settings
• Press Enter to proceed or Skip to go stage 2.
If you pressed Enter the display shows:
Back Yes
Reset all settings?
• Press Yes to proceed or Back to exit.
The display shows the current Type:
Back Next цхъ утф
7.1, All An, Mono/THX Sub
Type 1
• Press A or V to step through the available Types.
A description of the speakers for each type is shown on the top
line of the display. As you select each Type the digital surround
controller is reset to that Type.
When you have selected the Type you want:
Either:
• Press Next to proceed to configuring speakers, as described in
the next section.
Or:
• Press On/Off to return to standby.
Stage 1: Resetting the product
G Series DSP 26 31/10/03, 4:24:10 pm