MITSUBISHI ELECTRIC FX0N-232ADP - Manual (Page 3)

Transmission standard Conforming to RS232C, 25pin D-SUB, connector used
Isolation method Photo coupler isolation
Transmission distance 15m or less (shielded cable recommended)
Current consumption DC 5V less than 200mA from base unit
Control flags and
data registers
M8121:Send wait flag D8120:System configuration
M8122:Send flag D8122:Remainder of send data
M8123:Receive completion D8123:Amount of received data
M8161:8 bits/16 bits changeover D8124:Header byte
D8125:Terminator byte
Performance specification
INSTALLATION NOTES AND USAGE
General specification
Ambient Temperature 0 to 55°C in operation -20 to 70 °C in storage
Ambient Humidity 35 to 85% RH (no condensation) in operation
Vibration Resistance Conforming to JIS C 0911, 10 to 55Hz 0.5mm (max.2G),2 hours each in 3 axial
Impact Resistance Conforming to JIS C 0912, 10 G three times each in 3 axial directions
Operating Ambience Free from corrosive gas or excessive dust