Multi-Tech Systems BA-Series - Manual (Page 64)

64
MultiModemBA User Guide
Local Inactivity Timer (S29)
S29 defines the amount of idle time that can elapse between AT commands after the SETUP
password has been entered. If this timer expires, the LOGIN and SETUP passwords will have to be
re-entered.
S29 only takes effect when the modem has been sent a #DB1 command, which secures the modem
from local and remote configuration or dialing (i.e., no AT commands can be sent until the LOGIN
and SETUP passwords have been entered).
Units: Minutes
Range: 1-255
Default: 20