Motorola BLUETOOTH STEREO HEADPHONES - Manual (Page 4)

Wirelessly Listen to Music from Your Home Audio System
on a Second Home Audio System
Requires:
• Two Motorola Bluetooth
® Home Stereo Adapters (DC800) *
Overview
The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio
system on another home audio system.
Note: The distance between the two home stereo adapters can be up to 300 feet.
The initial setup procedure is:
Connect the first home stereo adapter to your music source.
Connect the second home stereo adapter to your audio listening device.
Pair the home stereo adapters.
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it is
easy to reconnect to the last device used after you have performed the initial pairing.
Connect Audio Cables
The provided cables allow you to connect the audio from your music source to the home stereo adapter.
The second stereo adapter connects to your audio listening device.
1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Note: The jacks on your music source may be labeled Tape Out or Audio-R (red) and Audio-L (white or black).
Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect
from the headphone jack on your music source to the Audio In jacks on the home stereo adapter.
* The Motorola Bluetooth Home Stereo Adapter (DC800) is a Class 1 Bluetooth device. Bluetooth features and Bluetooth Class 1 power levels
are not allowed for outdoor operation in France. To avoid unlawful interference with radio signals, do not use the Bluetooth features in France
unless you are indoors.
To maintain compliance with RF (radio frequency) exposure guidelines, you must keep the Motorola Bluetooth Home Stereo Adapter (DC800)
at least 20 centimeters (8 inches) away from any person.
4