Motorola BLUETOOTH STEREO HEADPHONES - Manual (Page 23)

Wirelessly Listen to Music from Your PC on Your Home Audio System
Requires:
• Two Motorola Bluetooth
® Home Stereo Adapters (DC800) *
Overview
The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your PC on your
home audio system speakers.
The initial setup procedure is:
1. Connect the first home stereo adapter to your PC.
2. Connect the second home stereo adapter to your home audio system.
3. Pair the home stereo adapters.
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it
is easy to reconnect to the last device used after you have performed the initial pairing.
Connect Audio Cables
The provided cables allow you to connect the audio from your PC to the home stereo adapter.
The second stereo adapter connects to your home audio system.
1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect
from the headphone jack on your music source to the Audio In jacks on the home stereo adapter.
* The Motorola Bluetooth Home Stereo Adapter (DC800) is a Class 1 Bluetooth device. Bluetooth features and Bluetooth Class 1 power levels
are not allowed for outdoor operation in France. To avoid unlawful interference with radio signals, do not use the Bluetooth features in France
unless you are indoors.
To maintain compliance with RF (radio frequency) exposure guidelines, you must keep the Motorola Bluetooth Home Stereo Adapter (DC800)
at least 20 centimeters (8 inches) away from any person.
23