Motorola BLUETOOTH STEREO HEADPHONES - Manual (Page 14)

2. Connect the Line In jacks on your audio listening device to the Audio Out jacks on the second home stereo
adapter.
Note: The jacks on your audio listening device may be labeled Tape In or Audio-R (red) and Audio-L
(white or black).
Alternative: If you do not have two available Line In jacks, use the provided 3.5 mm to RCA cable to connect
from the microphone jack on your audio listening device to the Audio Out jacks on the second home stereo
adapter.
Connect Power Supply to Home Stereo Adapter
1. Connect the power supplies to the home stereo adapters using the provided power cords.
Pair the Stereo Adapters
Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it is
easy to reconnect to the last device used after you have performed the initial pairing.
1. Turn on both stereo adapters.
14