Motorola F5217A - Manual (Page 5)

5
Using this Manual
Before using this manual and products it describes, be sure to read the Safety
instructions in Appendix A, the Warranty information in Appendix B and the FCC
information in Appendix C.
Who Should Use this Manual
This manual is intended for staff who operate the Mobile Workstation 800 (MW800)
and need to configure, upgrade or maintain its display box. This manual assumes the
reader is familiar with the MW800 and basic Windows operations. If this is not the
case, be sure to read the MW800 User’s Guide and documentation that came with
your version of Windows.
For documentation of supplied software applications, refer to the help file attached to
each application.
Manual Introduction
The MW800 mobile workstation consists of three separate interconnected
components: CPU box, Display and Keyboard. This manual only deals with the
display box, which is also referred to as either device or Display in this manual. This
manual is organized as follows:
• Section 1 provides an overview.
• Section 2 provides a description of basic operations.
• Section 3 describes various parameters that define Display configuration
when you turn on your computer.
• Section 4 explains how to upgrade display firmware.
• Section 5 describes how to get assistance from Motorola.
The Appendixes contain:
• Appendix A: Safety instructions
• Appendix B: Warranty information
• Appendix C: FCC information
• Appendix D: Display factory setup
• Appendix E: Troubleshooting information
• Appendix F: Acronyms and Abbreviations
Related Manuals
This manual describes the MW800 display box and provides basic operating
instructions. Please, note that although this manual refers to hardware and software