Marshall electronic ORCHID OR-841-HDSDI - Manual (Page 12)

On-Screen Menu
(continued)
REMOTE
PIN 1 THRU 8
(Pin 5 is Ground)
R TALLY
G TALLY
B TALLY
LEFT R TALLY
LEFT G TALLY
LEFT B TALLY
RIGHT R TALLY
RIGHT G TALLY
RIGHT B TALLY
SETUP
RETURN
FORMAT DISP
AUTO / ON / OFF
TIMECODE OFF / LITC / VITC1 / VITC2
POWER SAVE
ALWAYS ON
2 MIN
5 MIN
10 MIN
30 MIN
1 HOUR
2 HOUR
KEY LOCK LOCK / UNLOCK
RESET TO MFG DEFAULT > REST NOW / CANCEL
BACKUP USER CONFIG > BACKUP NOW / CANCEL
RESTORE USER CONFIG RESTORE NOW / CANCEL
Access the main menu by pushing the center MENU button on the front panel of the monitor.
Main Menu and Navigation
• Step through menu items by using the RotoMenu control.
• Choose a submenu or select a menu item by pushing the
RotoMenu control.
• Return to the previous menu by pressing the F-9 button.
• Exit the main menu by again pressing the F-9 button.
INFO SUBMENU
The INFO Submenu is a read-only display that gives the user
information about the particular screen being viewed.
No adjustment can be made from this submenu.
12
PICTURE SUBMENU
The Picture submenu allows the user to make adjustments to Brightness, Contrast, Saturation, Sharpness and
Gamma.
INPUT SUBMENU
The Input sub menu allows the user to select either the SDI-1
/ SDI-2 inputs or the Optional Input module if installed as the
source to be displayed.