Marshall electronic V-R82DP-2C - Manual

Product Overview
Features
Electrical Specifications
Mechanical Specifications
Operational Setup
Connectors
Switch Settings, Adjustments and Indicators
Warranty
1
2
3
4
5
6
7
8
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • Fax: 310-333-0688
www.LCDRacks.com
Email: [email protected]
V-R82DP-2C V-R82DP-2C Users Guide Users Guide
Marshall Electronics warranties to the first consumer, that this V-R82DP-2C Dual 7-inch LCD rack mounted monitor set will, under normal use,
be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of
purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor
and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications
in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties
other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period
described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the
display active viewing area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective
use of the monitor by our technicians.
Due to constant effort to improve products and product features, specifications may change without notice.
8 Warranty
7
Switch Settings, Adjustments and Indicators
Tally Indicators
Illuminate when active
Dry Erase Label
Image Adjustment Controls
Note: Tint only functions when NTSC
Video or S-Video are selected
Power On/Off switch
Illuminates red when
system power is
present
Illuminates Green
when monitor is ON
Note: Tapping any active input signal toggles BLUE GUN On/Off. Signal
selection is active when Blue Gun is on. Tap active selection to turn off
Composite Video signal
selector switches
Illuminates when
active
On Screen Display
On/Off
Lights when active
Screen aspect ratio switch 4:3 or 16:9 selector and indicators
4:3 Aspect 16:9 Aspect
Ver 2009-0512