Multi-Tech Systems MTSGSM User Manual
Page 38
MultiMobile SoftGSM User Guide
MTSGSM
38
+CNMI
New message indications to modem
Syntax
AT+CNMI=[
AT+CNMI? Returns the new message indications settings.
The response is +CNMI:
Use AT+CNMI=? for a list of supported settings
The response is +CNMI: (list of supported
supported
returned as +CMS ERROR:
Description
The AT+CNMI command sets how receiving of new messages from the network is
indicated to modem when the modem is active.
Defined values Meaning
1
Discard indication and reject new received message unsolicited result codes, when
the TA-TE link is reserved.
2
Buffer unsolicited result codes in the TA when TA-TE link is reserved and flush them
to the TE after reservation, otherwise forward them directly to the TE.
0
No SMS-DELIVER indications are routed to the TE.
1
Indication of SMS-DELIVER is routed to the TE using an unsolicited result code:
+CMTI:
0
No CBM indications are routed to the TE.
1
Indication of CBM is routed to the TE using an unsolicited result code: +CBMI:
0
No SMS-STATUS-REPORTs are routed to the TE.
0
TA buffer of an unsolicited result codes defined within this command is flushed to the
TE when
+CPAS
hone activity status
Syntax
AT+CPAS for status.
AT+CPAS=? for a list of supported values.
Description
The AT+CPAS command returns the activity status of the phone. It can be used to
check the phone before requesting action from the phone.
Possbile responses
Meaning
+CPAS: 0
Ready (phone allows commands from modem)
+CPAS: 1
Unavailable (phone does not allows commands from modem)
+CPAS: 2
Unknown
+CPAS: 3
Ringing
+CPAS: 4
Call in progress
+CPAS: 5
Asleep
+CPBR
Read phonebook entries
Syntax
AT+CPBR=
The response is +CPBR:
AT+CPBR=? for a list of supported
The response is +CPBR: (list of supported
Error codes is returned as +CME ERROR:
Description
The AT+CPBR command reads phonebook entries in location number range
AT+CPBS . If