Multi-Tech Systems MTSGSM - Manual (Page 35)

Chapter 5 - AT Commands, S-Registers, and Error Codes
MTSGSM 35
Extended AT Commands
+CBC Battery charge
Syntax AT+CBC for battery charge
The response is +CBC: ,
AT+CBC=? for a list of supported values.
The response is +CBC: (list of supported ),( list of supported )
Error codes is returned as +CME ERROR: :
Description The AT+CBC command returns the battery connection status and the battery charge
level.
Defined values Meaning
0
Phone is powered by the battery
1 Phone has a battery connected, but is not powered by it
2 Phone does not have battery connected
3 Recognized power fault, calls inhibited
0
Battery is exhausted or phone does not have a battery connected
1.100 Battery has 1-100 percent of capacity remaining
+CGMI Request manufacturer identification
Syntax AT+CGMI used to get phone manufacturer.
The response is +CGMI:
Error codes is returned as +CME ERROR: :
Description The AT+CGMI command returns one ore more lines of information text determined
by the phone manufacturer.
Defined values Meaning
Information text determined by the phone manufacturer
+CBST Select bearer service type
Syntax AT+CBST=[[,[,]]] used to set bearer service.
AT+CBST? returns selected bearer service
The response is +CBST: [,,]
AT+CBST=? for a list of supported bearer service types.
The response is +CBST: (list of supported ), (list of supported),
(list of supported )
Error codes is returned as +CME ERROR: :
Description The AT+CBST command sets the bearer service with data rate
and the connection element to be used when data calls are originated.
Defined values Meaning
7
9600 bps (V.32)
71 9600 bps (V.110)
0
Asynchronous modem
0
Transparent
1 Non-transparent (RLP)