MITSUBISHI ELECTRIC WS-65908 - Manual (Page 35)

35 35
Part III: Setup
A
n
te
nn
a
,
C
h
a
nn
e
l,
M
e
m
o
ry
,
N
a
m
e
,
a
n
d
S
Q
V
™
Antenna
(Figure 1)
Select Ant-A, or Ant-B. For each antenna,
you can add or delete channels in memory,
name channels, and add channels to the
SQV (Super Quick View™) list.
Channel
(Figure 1)
Select the channel you want to add or delete
from memory, name, or add to the SQV
Super Quick View™ list.
Memory
(Figure 1)
After all available channels have been mem-
orized with Memorize Channels, page 33,
weaker channels viewed with Ant-A or Ant-B
can be added and unwanted channels can
be deleted.
Use the CHANNEL button on the remote
control to view memorized channels.
Name
(Figure 1)
Channels shown on Ant-A or Ant-B can be
given names (up to four characters). After
you enter a name, it will appear on the TV
screen, next to the channel number.
Channel Menu: Antenna, Channel, Memory, Name, and SQV™
Figure 1. Channel menu
SQV (Super Quick View™)
Using The Remote Control
Viewing and changing SQV banks using the
remote control:
1 Press the SQV button.
2 To change memory banks, press a
number button within 5 seconds of
pressing the SQV button.
3
Press the SQV button repeatedly to
cycle through the channels available in
that bank.
Adding SQV channels using the remote con-
trol:
1 Use the CHANNEL or number buttons
to select the channel you want to add to
the current SQV memory bank.
2 Press and hold the SQV button for
about 3 seconds. When “SQV” and the
memory bank number appear under the
channel number, the channel has suc-
cessfully been added.
Removing SQV channels using the remote
control:
1 Press the SQV button repeatedly until
you see the desired channel.
2 While the channel number and SQV indi-
cator are still displayed on the screen,
press the CANCEL button. If the
CANCEL button is not pressed before
the SQV indicator disappears, the chan-
nel will not be removed.
3 When the SQV indicator disappears, the
channel has successfully been removed.
SQV (Super Quick View™)
Using The Menu Screen
(Figure 1)
SQV (Super Quick View™) allows you to put
together a list of your favorite channels from Ant-A
and Ant-B. You can store up to 6 channels in
each of the 9 different memory banks. Once you
have added a channel to the SQV memory, “SQV”
will appear under the channel number on the TV
screen.