Marmitek TOTALGUARD User Manual
Page 11
☺ Attention: This English language user manual will only use the English menu items.
2.3.2 The menu in English
The menu items in the English language menu are:
1. INSTALL
Registering and deregistering sensors and remote controls.
2. SET CLOCK
Setting the clock (5.1).
3. PHONE NUMS
Setting the phone numbers (5.2).
Submenu:
PHONE 1
PHONE 2
PHONE 3
PHONE 4
PHONE 5
PHONE 6
4. MESSAGE
Recording and checking your own spoken message (5.3).
Submenu:
1. RECORD
Record your own spoken message
2. REPLAY
Listen to your own spoken message
5. NEW PIN
Change your PIN code (8.3).
6. MEMORY CLEAR
Clear all sensors, remote controls, timers or settings (8.2).
Submenu:
CLEAR ALL SENSORS
Remove a registered sensor.
CLEAR ALL REMOTES
Remove a registered remote control.
CLEAR ALL TIMERS
Remove all timer settings at once.
MASTER RESET
Clear the memory.
7. OPTIES
Submenu:
Submenu:
CHIME - CHIME ON/CHIME OFF Chime on/off when system off (9.2). When the chime is switched on,
the display will show a
symbol.
SIREN - SIREN ON/SIREN OFF
Switch off siren for silent alarm (9.1).
HOUSECODE
Change the HouseCode for Home Automation functions (10.6).
UNITCODE
Change the UnitCode for Home Automation functions (10.6).
ANSWER TYPE
ANSWER ON/ANSWER OFF/VOICE MAIL (11.2).
SENSOR MODE
Use sensors as emergency sensor. See (9.5).
LANGUAGE
ENGLISH/FRANÇAIS/DEUTSCH/NEDERLANDS/ITALIANO/ESPANOL/
PORTUGUES/SVENSKA/ROMANA/TÜRKÇE.
8. DELAYS
Submenu:
ENTRY DELAY
The time you get to switch off the system after entering your house (8.1).
EXIT DELAY
The time you get before the system is switched on when you leave
your house (8.1).
DIAL DELAY
Delay before the system calls out in case of an alarm (8.1).
ANSWER DELAY
Delay before the system picks up the phone when dialling in (8.1).
9. SET TIMER
Submenu:
NEW TIMER
Setting a new timer (7.8).
BASIC OPTIONS
11
SAFEGUARD / TOTALGUARD
20071_20070228_UG_SC9000_EN 08-03-2007 10:07 Pagina 11