Memorex MLTD2622 - Manual (Page 23)

ENGLISH
21
Chapter 2 Installing the LCD TV
Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to
select TV and press the OK button.

Press the OK button to display the received channel list, then press ▲▼ to select a
channel at press OK button to confirm. Or, use the▪ (INPUT button) with 0-9 buttons
to select digital channel(for example 9.1)
The digital main channel might include many subchannels (for example 9-1, 9-
2..) that are showing program at the same time.
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.

Press the MENU button on the remote control to display the Main menu, and use the ◄►
buttons to select the TV.

.

Press the ▼ button to select Channel Scan, and press the OK button.
The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if
interrupted)
Channel List
5-2 RF5-2
9-1 KQED-HD
9-2 KOED-SD
8
CCT
12
13
15
Main
 TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
DVD
USB
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
Status: Scanning..... Cable
Analog Channels: 25
Digital Channels: 0
47%
TV
Channel Scan
Tuner Mode
Cable
Channel Skip
Favorite List
Time Zone
Eastern Time
Enter Select Exit