beautypg.com

Care and safety information, Setup, Cleaning discs – Philips Magnavox mdv436 User Manual

Page 10

background image

English

10

Care and Safety Information

DANGER!
High voltage! Do not open
the device. You run the risk of
getting an electric shock.

The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualifi ed
personnel.

Setup

Finding a suitable location

– Place the set on a fl at, hard and stable

surface. Do not place the set on a
carpet.

– Do not position the set on top of

other equipment that might heat it up
(e.g., receiver or amplifi er).

– Do not put anything under the set

(e.g., CDs, magazines).

– Install this unit near the AC outlet and

where the AC power plug can be
reached easily.

Space for ventilation

– Place the apparatus in a location with

adequate ventilation to prevent
internal heat build up. Allow at least
10 cm (4.0”) clearance from the rear
and the top of the set and 5cm (2.0”)
from the left and right to prevent
overheating.

10cm (4.0")

10cm (4.0")

5cm (2.0")

5cm (2.0")

Avoid high temperatures, moisture,

water and dust

– Apparatus shall not be exposed to

dripping or splashing.

– Do not place any sources of danger

on the apparatus (e.g., liquid fi lled
objects, lighted candles).

Cleaning discs

Some problems occur because the disc
inside the recorder is dirty (frozen
picture, sound disruptions, picture
distortions). To avoid these problems,
discs should be cleaned on a regular
basis.

To clean a disc, use a micro fi bre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.

CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for analog
discs. Since the optical unit (laser) of the
DVD recorder operates at a higher
power than regular DVD or CD players,
cleaning CDs intended for DVD or CD
players may damage the optical unit
(laser). Therefore, refrain from using a
cleaning CD.

01-37 MDV435_436_37_eng_RC2.indd 10

01-37 MDV435_436_37_eng_RC2.indd 10

2006-04-27 5:08:02 PM

2006-04-27 5:08:02 PM