Gefen EXT-HDMI1.3-848CPN - Manual (Page 20)

17
RS-232 COMMANDS
A Command
Routes the specifi ed Input to Output A.
Syntax y :
A[no space]param1
Parameters:
param1 HDMI Input (Source) [1 - 8]
Example: p
A5 routes Input 5 to Output A.
Notes:
Individual routing to other outputs (B - H) can be accomplished by using a similar
syntax and substituting the A with the range B though H. For example, to route
Input 7 to Output E, use the following command:
E[no space]7
See the table on page 16 for details.
ABCD... Multiple Routing Command
Route the specifi ed source to any combination of Outputs.
Syntax y :
param1[param1a][param1b][param1c]...param2
Parameters:
param1 HDMI Output (Display) [A - H]
param2 HDMI Input (Source) [1 - 8]
Example: p
ABFGH6 routes Input 6 to Outputs A, B, F, G, and H.
Notes:
Only one source (input) can be specifi ed at a time.